All MIBs › NEXANS-BM-MIB › adminReset
adminReset
Module: NEXANS-BM-MIB
OID (symbolic): NEXANS-BM-MIB::adminReset
OID (numeric): 1.3.6.1.4.1.266.20.2.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Writing this object causes the switch to perform a reset operation. The following reset types are supported. Set Values: resetCounters(2) This action resets all error and statistic counters to zero. This actions will NOT reboot the switch. rebootSwitch(3) This action resets switch and management. All counters, timers and other volatile data are reset to there power-up values stored in flash. This actions will reboot the switch. rebootToFactoryDefaults(4) This action resets switch and management. All volatile and nonvolatile data are reset to there power-up or factory default values. This actions will reboot the switch. renewIpAndVlanParameter(5) This action reinitializes the IP and VLAN module of the switch so that the actually set IP and VLAN parameters will take affect. This actions will NOT reboot the switch. Get values: resetIdle(1) Reading this object will allways return resetIdle(1).
What is adminReset?
Triggers a reset action when written: resetCounters(2) zeroes all error/statistic counters without rebooting, rebootSwitch(3) reboots the switch restoring volatile data from flash, rebootToFactoryDefaults(4) reboots and wipes both volatile and nonvolatile settings back to factory defaults, and renewIpAndVlanParameter(5) reinitializes IP/VLAN settings without a reboot; reading the object always returns resetIdle(1).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.266.20.2.1 snmpwalk -v2c -c public <target> NEXANS-BM-MIB::adminReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.266.20.2.1.1 snmpget -v2c -c public <target> NEXANS-BM-MIB::adminReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.266.20.2.1.1 i <value>
Start monitoring Nexans Advanced Networking Solutions switching equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NEXANS-BM-MIB::adminReset OID value, configure state conditions and alerts, and monitor any Nexans Advanced Networking Solutions switching equipment from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.266 | nexansANS | NEXANS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.266.20 | bmSwitchMIB | NEXANS-BM-MIB |
| 1.3.6.1.4.1.266.20.2 | bmSwitchAdmin | NEXANS-BM-MIB |
| 1.3.6.1.4.1.266.20.2.1 | adminReset | NEXANS-BM-MIB |