All MIBs › NEXANS-BM-MIB › adminAgentIpAddress
adminAgentIpAddress
Module: NEXANS-BM-MIB
OID (symbolic): NEXANS-BM-MIB::adminAgentIpAddress
OID (numeric): 1.3.6.1.4.1.266.20.2.3
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: The IP address of the switch agent's ethernet interface. If the value of adminDHCP is enable(1) this value is read-only. Changes of this value will take affect after the next switch reboot or after setting adminReset to renewIpAndVlanParameter(5).
What is adminAgentIpAddress?
Sets the switch management agent's IP address; this object is read-only whenever adminAgentDhcp is set to enable(1), since DHCP is then supplying the address instead.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.266.20.2.3 snmpwalk -v2c -c public <target> NEXANS-BM-MIB::adminAgentIpAddress
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.266.20.2.3.1 snmpget -v2c -c public <target> NEXANS-BM-MIB::adminAgentIpAddress.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.266.20.2.3.1 a <value>
Start monitoring Nexans Advanced Networking Solutions switching equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NEXANS-BM-MIB::adminAgentIpAddress OID value, configure state conditions and alerts, and monitor any Nexans Advanced Networking Solutions switching equipment from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.266 | nexansANS | NEXANS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.266.20 | bmSwitchMIB | NEXANS-BM-MIB |
| 1.3.6.1.4.1.266.20.2 | bmSwitchAdmin | NEXANS-BM-MIB |
| 1.3.6.1.4.1.266.20.2.3 | adminAgentIpAddress | NEXANS-BM-MIB |