All MIBs › NETSCREEN-NAT-MIB › nsNatDipLow
nsNatDipLow
Module: NETSCREEN-NAT-MIB
OID (symbolic): NETSCREEN-NAT-MIB::nsNatDipLow
OID (numeric): 1.3.6.1.4.1.3224.11.2.1.3
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-only
Description: Start IP Address Range. The range of addresses in a DIP pool must be in the same subnet as the interface IP address, but the DIP pool should not contain the interface IP or any MIP or VIP address that might on that subnet.
What is nsNatDipLow?
The starting IP address of a DIP (Dynamic IP) pool's address range, from which the firewall dynamically assigns source addresses when performing NAT on outgoing traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3224.11.2.1.3 snmpwalk -v2c -c public <target> NETSCREEN-NAT-MIB::nsNatDipLow
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3224.11.2.1.3.1 snmpget -v2c -c public <target> NETSCREEN-NAT-MIB::nsNatDipLow.1
Start monitoring Juniper NetScreen/SSG firewall appliance (NAT MIP/DIP/VIP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETSCREEN-NAT-MIB::nsNatDipLow OID value, configure state conditions and alerts, and monitor any Juniper NetScreen/SSG firewall appliance (NAT MIP/DIP/VIP) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3224 | netscreen | NETSCREEN-SMI |
| 1.3.6.1.4.1.3224.11 | netscreenNAT | NETSCREEN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3224.11.2 | nsNatDipTable | NETSCREEN-NAT-MIB |
| 1.3.6.1.4.1.3224.11.2.1 | nsNatDipEntry | NETSCREEN-NAT-MIB |
| 1.3.6.1.4.1.3224.11.2.1.3 | nsNatDipLow | NETSCREEN-NAT-MIB |