All MIBs › NETSCREEN-NAT-MIB › nsNatDipHigh
nsNatDipHigh
Module: NETSCREEN-NAT-MIB
OID (symbolic): NETSCREEN-NAT-MIB::nsNatDipHigh
OID (numeric): 1.3.6.1.4.1.3224.11.2.1.4
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-only
Description: End IP Address Range. The range of addresses in a DIP pool must be in the same subnet as the interface IP address, but the DIP pool should not contain the interface IP or any MIP or VIP address that might on that subnet.
What is nsNatDipHigh?
The ending IP address of a DIP (Dynamic IP) pool's address range, paired with nsNatDipLow to define the full block of addresses the firewall can draw from for source NAT.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3224.11.2.1.4 snmpwalk -v2c -c public <target> NETSCREEN-NAT-MIB::nsNatDipHigh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3224.11.2.1.4.1 snmpget -v2c -c public <target> NETSCREEN-NAT-MIB::nsNatDipHigh.1
Start monitoring Juniper NetScreen/SSG firewall appliance (NAT MIP/DIP/VIP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETSCREEN-NAT-MIB::nsNatDipHigh OID value, configure state conditions and alerts, and monitor any Juniper NetScreen/SSG firewall appliance (NAT MIP/DIP/VIP) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3224 | netscreen | NETSCREEN-SMI |
| 1.3.6.1.4.1.3224.11 | netscreenNAT | NETSCREEN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3224.11.2 | nsNatDipTable | NETSCREEN-NAT-MIB |
| 1.3.6.1.4.1.3224.11.2.1 | nsNatDipEntry | NETSCREEN-NAT-MIB |
| 1.3.6.1.4.1.3224.11.2.1.4 | nsNatDipHigh | NETSCREEN-NAT-MIB |