All MIBs › NETOPIA-MIB › ipEncap
ipEncap
Module: NETOPIA-MIB
OID (symbolic): NETOPIA-MIB::ipEncap
OID (numeric): 1.3.6.1.4.1.304.1.3.1.4.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The type of IP datagram encapsulation that the device will use after a restart: Ethernet or IEEE802.2. The active type of IP datagram encapsulation can be determined by examining the appropriate instance of the ifType object in the MIB-II interfaces table entry for the device's Ethernet interface. If the value of that instance of ifType is 'ethernet-csmacd(6)', then the active type of IP datagram encapsulation is Ethernet; if the value of that instance of ifType is 'iso88023-csmacd(7)', then the active type of IP datagram encapsulation is IEEE802.2.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.304.1.3.1.4.4 snmpwalk -v2c -c public <target> NETOPIA-MIB::ipEncap
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.304.1.3.1.4.4.1 snmpget -v2c -c public <target> NETOPIA-MIB::ipEncap.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.304.1.3.1.4.4.1 i <value>
Start monitoring Netopia DSL router/gateway with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETOPIA-MIB::ipEncap OID value, configure state conditions and alerts, and monitor any Netopia DSL router/gateway from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.304 | farallon | NETOPIA-MIB |
| 1.3.6.1.4.1.304.1.3.1 | netopia | NETOPIA-MIB |
| 1.3.6.1.4.1.304.1.3.1.4 | ipParams | NETOPIA-MIB |
| 1.3.6.1.4.1.304.1.3.1.4.4 | ipEncap | NETOPIA-MIB |