All MIBs › NETONIX-SWITCH-MIB › temp
temp
Module: NETONIX-SWITCH-MIB
OID (symbolic): NETONIX-SWITCH-MIB::temp
OID (numeric): 1.3.6.1.4.1.46242.3.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The current temperature for this sensor
What is temp?
This read-only integer is the current temperature reading from one sensor in the switch's temperature-monitoring table. Admins poll it to catch overheating before it causes throttling or damage, correlating it with the sensor's tempDescription to know which part of the switch is running hot. For example, a temp value climbing from 35 to 75 on the sensor labeled "PoE Board" would prompt an admin to check for blocked ventilation or excessive PoE load.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.46242.3.1.3 snmpwalk -v2c -c public <target> NETONIX-SWITCH-MIB::temp
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.46242.3.1.3.1 snmpget -v2c -c public <target> NETONIX-SWITCH-MIB::temp.1
Start monitoring Netonix managed switch (WISP-oriented) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETONIX-SWITCH-MIB::temp OID value, configure state conditions and alerts, and monitor any Netonix managed switch (WISP-oriented) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.46242 | netonixSwitch | NETONIX-SWITCH-MIB |
| 1.3.6.1.4.1.46242.3 | tempTable | NETONIX-SWITCH-MIB |
| 1.3.6.1.4.1.46242.3.1 | tempEntry | NETONIX-SWITCH-MIB |
| 1.3.6.1.4.1.46242.3.1.3 | temp | NETONIX-SWITCH-MIB |