All MIBs › NETLINK-SPECIFIC-MIB › portVoiceOperAutoPoll
portVoiceOperAutoPoll
Module: NETLINK-SPECIFIC-MIB
OID (symbolic): NETLINK-SPECIFIC-MIB::portVoiceOperAutoPoll
OID (numeric): 1.3.6.1.4.1.173.7.3.8.2.1.23
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description:
The flag to enable or disable auto polling. This is applicable only when the Auto Dial feature is enabled. When enabled, the node periodically polls the destination. If the poll is not acknowledged, the node will busy-out the channel. This can be useful in situations where the destination is an emergency number that must always be available. If the destination does not answer the automatic poll, the busy-out condition will notify an attached PBX that the emergency call should be routed to another call routing device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.173.7.3.8.2.1.23 snmpwalk -v2c -c public <target> NETLINK-SPECIFIC-MIB::portVoiceOperAutoPoll
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.173.7.3.8.2.1.23.1 snmpget -v2c -c public <target> NETLINK-SPECIFIC-MIB::portVoiceOperAutoPoll.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.173 | netlink | NETLINK-SPECIFIC-MIB |
| 1.3.6.1.4.1.173.7 | local | NETLINK-SPECIFIC-MIB |
| 1.3.6.1.4.1.173.7.3 | port | NETLINK-SPECIFIC-MIB |
| 1.3.6.1.4.1.173.7.3.8 | portVoiceGroup | NETLINK-SPECIFIC-MIB |
| 1.3.6.1.4.1.173.7.3.8.2 | portVoiceOperTable | NETLINK-SPECIFIC-MIB |
| 1.3.6.1.4.1.173.7.3.8.2.1 | portVoiceOperEntry | NETLINK-SPECIFIC-MIB |
| 1.3.6.1.4.1.173.7.3.8.2.1.23 | portVoiceOperAutoPoll | NETLINK-SPECIFIC-MIB |