All MIBs › NETLINK-SPECIFIC-MIB › portDLCIBackupGroup
portDLCIBackupGroup
Module: NETLINK-SPECIFIC-MIB
OID (symbolic): NETLINK-SPECIFIC-MIB::portDLCIBackupGroup
OID (numeric): 1.3.6.1.4.1.173.7.3.2.2.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This object specifies (if configured as any number other than zero) that this is a primary DLCI, and identifies the backup DLCI(s) (in a Frame Relay backup group) that will take over if this DLCI fails. This is applicable only on an initiating node, which is the node that will initiate the switchover to a backup DLCI. At switchover, the initiating node notifies the remote node of the change.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.173.7.3.2.2.1.13 snmpwalk -v2c -c public <target> NETLINK-SPECIFIC-MIB::portDLCIBackupGroup
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.173.7.3.2.2.1.13.1 snmpget -v2c -c public <target> NETLINK-SPECIFIC-MIB::portDLCIBackupGroup.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.173.7.3.2.2.1.13.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.173 | netlink | NETLINK-SPECIFIC-MIB |
| 1.3.6.1.4.1.173.7 | local | NETLINK-SPECIFIC-MIB |
| 1.3.6.1.4.1.173.7.3 | port | NETLINK-SPECIFIC-MIB |
| 1.3.6.1.4.1.173.7.3.2 | portFrGroup | NETLINK-SPECIFIC-MIB |
| 1.3.6.1.4.1.173.7.3.2.2 | portDLCIConfigTable | NETLINK-SPECIFIC-MIB |
| 1.3.6.1.4.1.173.7.3.2.2.1 | portDLCIEntry | NETLINK-SPECIFIC-MIB |
| 1.3.6.1.4.1.173.7.3.2.2.1.13 | portDLCIBackupGroup | NETLINK-SPECIFIC-MIB |