All MIBs › NETLINK-SPECIFIC-MIB › ipxStaticRouteConfigRowStatus
ipxStaticRouteConfigRowStatus
Module: NETLINK-SPECIFIC-MIB
OID (symbolic): NETLINK-SPECIFIC-MIB::ipxStaticRouteConfigRowStatus
OID (numeric): 1.3.6.1.4.1.173.7.4.3.1.1.1.4
Node type: OBJECT-TYPE
Type: RowStatus
Access: read-write
Description: This variable is used to manage the creation and deletion of conceptual rows in the ipxStaticRouteTable and follows the SNMPv2 RowStatus conventions by supporting the following values:
- `active', which indicates that the conceptual row is available for use by the managed device. For a management protocol set operation, a genErr response is returned when the row does not exist.
- `createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device. For a management protocol set operation, a genErr response is returned when the row already exists.
- `destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row.
Note that all of the above values may be specified in a management protocol set operation, and only the 'active' value will be returned in response to a management protocol retrieval operation. For a management protocol set operation, if other variable bindings are included in the same PDU, then a genErr response is returned.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.173.7.4.3.1.1.1.4 snmpwalk -v2c -c public <target> NETLINK-SPECIFIC-MIB::ipxStaticRouteConfigRowStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.173.7.4.3.1.1.1.4.1 snmpget -v2c -c public <target> NETLINK-SPECIFIC-MIB::ipxStaticRouteConfigRowStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.173.7.4.3.1.1.1.4.1 s <value>
Start monitoring NetLink protocol converter (legacy SNA/SDLC gateway) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETLINK-SPECIFIC-MIB::ipxStaticRouteConfigRowStatus OID value, configure state conditions and alerts, and monitor any NetLink protocol converter (legacy SNA/SDLC gateway) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.173 | netlink | NETLINK-SPECIFIC-MIB |
| 1.3.6.1.4.1.173.7 | local | NETLINK-SPECIFIC-MIB |
| 1.3.6.1.4.1.173.7.4 | nlInterfaces | NETLINK-SPECIFIC-MIB |
| 1.3.6.1.4.1.173.7.4.3 | ipxConfig | NETLINK-SPECIFIC-MIB |
| 1.3.6.1.4.1.173.7.4.3.1 | ipxConfigRouting | NETLINK-SPECIFIC-MIB |
| 1.3.6.1.4.1.173.7.4.3.1.1 | ipxStaticRouteConfigTable | NETLINK-SPECIFIC-MIB |
| 1.3.6.1.4.1.173.7.4.3.1.1.1 | ipxStaticRouteConfigEntry | NETLINK-SPECIFIC-MIB |
| 1.3.6.1.4.1.173.7.4.3.1.1.1.4 | ipxStaticRouteConfigRowStatus | NETLINK-SPECIFIC-MIB |