All MIBs › NETGEAR-QOS-COS-MIB › agentCosQueueMgmtType
agentCosQueueMgmtType
Module: NETGEAR-QOS-COS-MIB
OID (symbolic): NETGEAR-QOS-COS-MIB::agentCosQueueMgmtType
OID (numeric): 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.4.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The queue depth management technique used when per-queue specification is supported. If taildrop(1), then all new packets presented to the queue are dropped based on some maximum threshold value(s). If wred(2), then an active queue management scheme is employed whereby packet drop precedence is considered during times of queue congestion using WRED parameters. The necessary queue management parameters are specified in the agentCosQueueMgmtEntry for the corresponding agentCosQueueIntfIndex and agentCosQueueIndex values. The default for this object is taildrop(1).
Implementations that do not support weighted RED must return taildrop(1) for this value and must not allow a value of wred(2) to be set.
What is agentCosQueueMgmtType?
Sets the per-queue depth-management technique when per-queue configuration is supported: taildrop(1) or wred(2); defaults to taildrop, and implementations without WRED support must always report taildrop. An admin selects wred on a specific queue to get smoother congestion-avoidance behavior than a hard tail-drop cutoff.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.4.1.5 snmpwalk -v2c -c public <target> NETGEAR-QOS-COS-MIB::agentCosQueueMgmtType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.4.1.5.1 snmpget -v2c -c public <target> NETGEAR-QOS-COS-MIB::agentCosQueueMgmtType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.4.1.5.1 i <value>
Start monitoring Netgear FastPath-based managed switch (Class-of-Service queue mapping) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-QOS-COS-MIB::agentCosQueueMgmtType OID value, configure state conditions and alerts, and monitor any Netgear FastPath-based managed switch (Class-of-Service queue mapping) from a single console.
OID Breakdown
Upper-level ancestors (18 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.674 | dell | ArrayManager-MIB |
| 1.3.6.1.4.1.674.10895 | dellLan | Dell-Vendor-MIB |
| 1.3.6.1.4.1.674.10895.5000 | dellLanStandard | Dell-Vendor-MIB |
| 1.3.6.1.4.1.674.10895.5000.2 | dellLanExtension | Dell-Vendor-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132 | lvl7 | BROADCOM-REF-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1 | lvl7Products | BROADCOM-REF-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1 | fastPath | BROADCOM-REF-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3 | fastPathQOS | FASTPATH-QOS-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3 | fastPathQOSCOS | FASTPATH-QOS-COS-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2 | agentCosQueueCfgGroup | FASTPATH-QOS-COS-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.4 | agentCosQueueTable | FASTPATH-QOS-COS-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.4.1 | agentCosQueueEntry | FASTPATH-QOS-COS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.4.1.5 | agentCosQueueMgmtType | NETGEAR-QOS-COS-MIB |