All MIBs › NETGEAR-QOS-COS-MIB › agentCosQueueMgmtPercentTailDropThreshold
agentCosQueueMgmtPercentTailDropThreshold
Module: NETGEAR-QOS-COS-MIB
OID (symbolic): NETGEAR-QOS-COS-MIB::agentCosQueueMgmtPercentTailDropThreshold
OID (numeric): 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.5.1.6
Node type: OBJECT-TYPE
Type: Percent
Access: read-write
Description: Tail drop queue threshold above which all packets are dropped for the current drop precedence level. The value specifies the threshold based on a percentage of the overall device queue size. Since device implementations vary, the actual value deployed may be rounded up or down accordingly.
The default value, for all queues, is 100% for drop precedence 1 and non-TCP traffic, 90% and 80% for drop precedences 2 and 3.
This object is only used when agentCosQueueMgmtType is set to taildrop(1).
What is agentCosQueueMgmtPercentTailDropThreshold?
Sets, as a percentage of overall device queue size, the tail-drop threshold above which all packets at this drop-precedence level are dropped; defaults to 100% for drop precedence 1/non-TCP traffic and 90%/80% for precedences 2/3. This object only applies when agentCosQueueMgmtType is taildrop, and an admin tunes it to control how aggressively lower-priority traffic is dropped under congestion.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.5.1.6 snmpwalk -v2c -c public <target> NETGEAR-QOS-COS-MIB::agentCosQueueMgmtPercentTailDropThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.5.1.6.1 snmpget -v2c -c public <target> NETGEAR-QOS-COS-MIB::agentCosQueueMgmtPercentTailDropThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.5.1.6.1 s <value>
Start monitoring Netgear FastPath-based managed switch (Class-of-Service queue mapping) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-QOS-COS-MIB::agentCosQueueMgmtPercentTailDropThreshold OID value, configure state conditions and alerts, and monitor any Netgear FastPath-based managed switch (Class-of-Service queue mapping) from a single console.
OID Breakdown
Upper-level ancestors (18 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.674 | dell | ArrayManager-MIB |
| 1.3.6.1.4.1.674.10895 | dellLan | Dell-Vendor-MIB |
| 1.3.6.1.4.1.674.10895.5000 | dellLanStandard | Dell-Vendor-MIB |
| 1.3.6.1.4.1.674.10895.5000.2 | dellLanExtension | Dell-Vendor-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132 | lvl7 | BROADCOM-REF-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1 | lvl7Products | BROADCOM-REF-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1 | fastPath | BROADCOM-REF-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3 | fastPathQOS | FASTPATH-QOS-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3 | fastPathQOSCOS | FASTPATH-QOS-COS-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2 | agentCosQueueCfgGroup | FASTPATH-QOS-COS-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.5 | agentCosQueueMgmtTable | FASTPATH-QOS-COS-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.5.1 | agentCosQueueMgmtEntry | FASTPATH-QOS-COS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.5.1.6 | agentCosQueueMgmtPercentTailDropThreshold | NETGEAR-QOS-COS-MIB |