All MIBs › NETGEAR-QOS-COS-MIB › agentCosQueueIntfShapingRate
agentCosQueueIntfShapingRate
Module: NETGEAR-QOS-COS-MIB
OID (symbolic): NETGEAR-QOS-COS-MIB::agentCosQueueIntfShapingRate
OID (numeric): 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.3.1.2
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: Maximum bandwidth allowed for this interface as a whole, typically used to shape the outbound transmission rate. The value is specified in terms of percentage of overall link speed for the port in 1% increments. A value of 0 means there is no maximum bandwidth limit in effect and that the interface is allowed to transmit up to its maximum line rate (i.e., work conserving method). The default value is 0.
When set to a non-zero value, the interface is restricted to using at most the bandwidth specified in this object for the outbound transmission rate (i.e., non-work-conserving method). This bandwidth value is independent of any per-queue maximum bandwidth value(s) in effect for the interface, as specified in the agentCosQueueMaxBandwidth ohject, and should be considered as a second-level transmission rate control mechanism that regulates the output of the entire interface regardless of which queues originate the outbound traffic.
What is agentCosQueueIntfShapingRate?
Sets the maximum outbound bandwidth for this interface as a whole, in 1% increments of link speed (0-4294967295); 0 means no shaping limit (work-conserving), while a non-zero value caps the interface's transmit rate (non-work-conserving). An admin uses this to rate-limit an interface's total egress throughput, independent of any per-queue bandwidth settings.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.3.1.2 snmpwalk -v2c -c public <target> NETGEAR-QOS-COS-MIB::agentCosQueueIntfShapingRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.3.1.2.1 snmpget -v2c -c public <target> NETGEAR-QOS-COS-MIB::agentCosQueueIntfShapingRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.3.1.2.1 i <value>
Start monitoring Netgear FastPath-based managed switch (Class-of-Service queue mapping) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-QOS-COS-MIB::agentCosQueueIntfShapingRate OID value, configure state conditions and alerts, and monitor any Netgear FastPath-based managed switch (Class-of-Service queue mapping) from a single console.
OID Breakdown
Upper-level ancestors (18 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.674 | dell | ArrayManager-MIB |
| 1.3.6.1.4.1.674.10895 | dellLan | Dell-Vendor-MIB |
| 1.3.6.1.4.1.674.10895.5000 | dellLanStandard | Dell-Vendor-MIB |
| 1.3.6.1.4.1.674.10895.5000.2 | dellLanExtension | Dell-Vendor-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132 | lvl7 | BROADCOM-REF-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1 | lvl7Products | BROADCOM-REF-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1 | fastPath | BROADCOM-REF-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3 | fastPathQOS | FASTPATH-QOS-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3 | fastPathQOSCOS | FASTPATH-QOS-COS-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2 | agentCosQueueCfgGroup | FASTPATH-QOS-COS-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.3 | agentCosQueueControlTable | FASTPATH-QOS-COS-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.3.1 | agentCosQueueControlEntry | FASTPATH-QOS-COS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.2.3.1.2 | agentCosQueueIntfShapingRate | NETGEAR-QOS-COS-MIB |