NETGEAR-QOS-COS-MIB :: agentCosMapIntfTrustMode

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › NETGEAR-QOS-COS-MIB › agentCosMapIntfTrustMode

agentCosMapIntfTrustMode

Module: NETGEAR-QOS-COS-MIB

OID (symbolic): NETGEAR-QOS-COS-MIB::agentCosMapIntfTrustMode

OID (numeric): 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.1.3.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The class of service trust mode of an interface. When set to a trusted mode, the appropriate COS mapping table is used as follows:

trustDot1p(2) : dot1dTrafficClassTable trustIpPrecedence(3): agentCosMapIpPrecTable trustIpDscp(4): agentCosMapIpDscpTable

For an untrusted(1) interface, packets are handled in accordance with the dot1dPortDefaultUserPriority value of the ingress port.

What is agentCosMapIntfTrustMode?

Sets the class-of-service trust mode for an interface: untrusted(1) (uses dot1dPortDefaultUserPriority), trustDot1p(2) (uses dot1p tags via dot1dTrafficClassTable), trustIpPrecedence(3) (uses agentCosMapIpPrecTable), or trustIpDscp(4) (uses agentCosMapIpDscpTable). An admin picks the trust mode matching the marking scheme used upstream, so incoming packets get mapped to the correct output queue.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.1.3.1.2
snmpwalk -v2c -c public <target> NETGEAR-QOS-COS-MIB::agentCosMapIntfTrustMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.1.3.1.2.1
snmpget -v2c -c public <target> NETGEAR-QOS-COS-MIB::agentCosMapIntfTrustMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.1.3.1.2.1 i <value>

Start monitoring Netgear FastPath-based managed switch (Class-of-Service queue mapping) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-QOS-COS-MIB::agentCosMapIntfTrustMode OID value, configure state conditions and alerts, and monitor any Netgear FastPath-based managed switch (Class-of-Service queue mapping) from a single console.

OID Breakdown

Upper-level ancestors (18 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.674dellArrayManager-MIB
1.3.6.1.4.1.674.10895dellLanDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000dellLanStandardDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000.2dellLanExtensionDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000.2.6132lvl7BROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1lvl7ProductsBROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1fastPathBROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3fastPathQOSFASTPATH-QOS-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3fastPathQOSCOSFASTPATH-QOS-COS-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.1agentCosMapCfgGroupFASTPATH-QOS-COS-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.1.3agentCosMapIntfTrustTableFASTPATH-QOS-COS-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.1.3.1agentCosMapIntfTrustEntryFASTPATH-QOS-COS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.3.1.3.1.2agentCosMapIntfTrustModeNETGEAR-QOS-COS-MIB