All MIBs › NETGEAR-POWER-ETHERNET-MIB › agentPethPowerDetectionType
agentPethPowerDetectionType
Module: NETGEAR-POWER-ETHERNET-MIB
OID (symbolic): NETGEAR-POWER-ETHERNET-MIB::agentPethPowerDetectionType
OID (numeric): 1.3.6.1.4.1.4526.10.15.1.1.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Describes PD detection mechanism performed by the PSE port. A value of none(0) means no detection is done. A value of legacy(1) means only legacy capacitive detection scheme is used. A value of 4ptdot3afonly(2) means that IEEE 802.3af 4point detection scheme is used. A value of 4ptdot3afandlegacy(3)means that IEEE 802.3af 4point detection scheme is used and when that fails to detect a connected PD, legacity capacitive detection is used. A value of 2ptdot3afonly(4) means that IEEE 802.3af 2point detection scheme is used. A value of 2ptdot3afandlegacy(5)means that IEEE 802.3af 2point detection scheme is used and when that fails to detect a connected PD, legacity capacitive detection is used. The value 'none' can not be forcibly set by the administrator.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.10.15.1.1.1.8 snmpwalk -v2c -c public <target> NETGEAR-POWER-ETHERNET-MIB::agentPethPowerDetectionType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.10.15.1.1.1.8.1 snmpget -v2c -c public <target> NETGEAR-POWER-ETHERNET-MIB::agentPethPowerDetectionType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.10.15.1.1.1.8.1 i <value>
Start monitoring Netgear managed PoE switch (Power Sourcing Equipment hardware detail) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-POWER-ETHERNET-MIB::agentPethPowerDetectionType OID value, configure state conditions and alerts, and monitor any Netgear managed PoE switch (Power Sourcing Equipment hardware detail) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4526 | netgear | FSM726S-MIB |
| 1.3.6.1.4.1.4526.10 | ng7000managedswitch | Netgear-MIB |
| 1.3.6.1.4.1.4526.10.15 | fastPathpowerEthernetMIB | BROADCOM-POWER-ETHERNET-MIB |
| 1.3.6.1.4.1.4526.10.15.1 | agentPethObjects | BROADCOM-POWER-ETHERNET-MIB |
| 1.3.6.1.4.1.4526.10.15.1.1 | agentPethPsePortTable | BROADCOM-POWER-ETHERNET-MIB |
| 1.3.6.1.4.1.4526.10.15.1.1.1 | agentPethPsePortEntry | BROADCOM-POWER-ETHERNET-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4526.10.15.1.1.1.8 | agentPethPowerDetectionType | NETGEAR-POWER-ETHERNET-MIB |