NETGEAR-POWER-ETHERNET-MIB :: agentPethFaultStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › NETGEAR-POWER-ETHERNET-MIB › agentPethFaultStatus

agentPethFaultStatus

Module: NETGEAR-POWER-ETHERNET-MIB

OID (symbolic): NETGEAR-POWER-ETHERNET-MIB::agentPethFaultStatus

OID (numeric): 1.3.6.1.4.1.4526.10.15.1.1.1.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Describes the error description when the pse port is in fault status. A value of none(0) specifies that the pse port is not in any error state. A value of mpsAbsent(1) specifies that the pse port has detected and absence of main power supply. A value of short(2) specifies that the pse port has detected a short circuit condition. A value of overload(3) specifies that the pd connected to the pse port had tried to draw more power than permissible by the hardware. A value of powerDenied(4) specifies that the pse port has been denied power because of shortage of power or due to administrative action.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.10.15.1.1.1.9
snmpwalk -v2c -c public <target> NETGEAR-POWER-ETHERNET-MIB::agentPethFaultStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.10.15.1.1.1.9.1
snmpget -v2c -c public <target> NETGEAR-POWER-ETHERNET-MIB::agentPethFaultStatus.1

Start monitoring Netgear managed PoE switch (Power Sourcing Equipment hardware detail) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-POWER-ETHERNET-MIB::agentPethFaultStatus OID value, configure state conditions and alerts, and monitor any Netgear managed PoE switch (Power Sourcing Equipment hardware detail) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4526netgearFSM726S-MIB
1.3.6.1.4.1.4526.10ng7000managedswitchNetgear-MIB
1.3.6.1.4.1.4526.10.15fastPathpowerEthernetMIBBROADCOM-POWER-ETHERNET-MIB
1.3.6.1.4.1.4526.10.15.1agentPethObjectsBROADCOM-POWER-ETHERNET-MIB
1.3.6.1.4.1.4526.10.15.1.1agentPethPsePortTableBROADCOM-POWER-ETHERNET-MIB
1.3.6.1.4.1.4526.10.15.1.1.1agentPethPsePortEntryBROADCOM-POWER-ETHERNET-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4526.10.15.1.1.1.9agentPethFaultStatusNETGEAR-POWER-ETHERNET-MIB