NETGEAR-MGMT-SECURITY-MIB :: agentLanMngInfListService

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › NETGEAR-MGMT-SECURITY-MIB › agentLanMngInfListService

agentLanMngInfListService

Module: NETGEAR-MGMT-SECURITY-MIB

OID (symbolic): NETGEAR-MGMT-SECURITY-MIB::agentLanMngInfListService

OID (numeric): 1.3.6.1.4.1.4526.11.11.3.3.1.5

Node type: OBJECT-TYPE

Type: AgentLanMngInfServiceType

Access: read-write

Description: The type of services that this rule applies to. By setting this to a specific service type, the rule will only apply if the request is coming to the switch using the particular protocol type specified. The Service type address can be configured to be 0, which means any of the supported protocols or service such as SNMP, HTTP, HTTPS are applicable.User must enter the type of service value along with agentLanMngInfListAction, agentLanMngInfListIpAddr and agentLanMngInfListPriority.

What is agentLanMngInfListService?

Specifies which management protocol a rule applies to: allType(0) for any protocol, or snmp(1), http(2), https(3) individually. Admins use this to, for example, permit HTTPS management from a subnet while denying plain HTTP from the same range.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.11.11.3.3.1.5
snmpwalk -v2c -c public <target> NETGEAR-MGMT-SECURITY-MIB::agentLanMngInfListService

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.11.11.3.3.1.5.1
snmpget -v2c -c public <target> NETGEAR-MGMT-SECURITY-MIB::agentLanMngInfListService.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.11.11.3.3.1.5.1 s <value>

Start monitoring Netgear FastPath-based managed switch (management-plane ACL) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-MGMT-SECURITY-MIB::agentLanMngInfListService OID value, configure state conditions and alerts, and monitor any Netgear FastPath-based managed switch (management-plane ACL) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4526netgearFSM726S-MIB
1.3.6.1.4.1.4526.11ng700smartswitchNetgear-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4526.11.11agentMgmtSecurityNETGEAR-MGMT-SECURITY-MIB
1.3.6.1.4.1.4526.11.11.3agentACALConfigGroupNETGEAR-MGMT-SECURITY-MIB
1.3.6.1.4.1.4526.11.11.3.3agentLanMngInfListTableNETGEAR-MGMT-SECURITY-MIB
1.3.6.1.4.1.4526.11.11.3.3.1agentLanMngInfListEntryNETGEAR-MGMT-SECURITY-MIB
1.3.6.1.4.1.4526.11.11.3.3.1.5agentLanMngInfListServiceNETGEAR-MGMT-SECURITY-MIB