NETGEAR-MGMT-SECURITY-MIB :: agentLanMngInfListIpNetMask

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › NETGEAR-MGMT-SECURITY-MIB › agentLanMngInfListIpNetMask

agentLanMngInfListIpNetMask

Module: NETGEAR-MGMT-SECURITY-MIB

OID (symbolic): NETGEAR-MGMT-SECURITY-MIB::agentLanMngInfListIpNetMask

OID (numeric): 1.3.6.1.4.1.4526.11.11.3.3.1.4

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-write

Description: The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. Using this in conjunction with the ipAddress given above, it is possible to make the rule applies to a subnet instead of a specific address (to force the rule to apply to a single address, use a netmask with all bits set to 1 (i.e. 255.255.255.255 netmask).User must enter the subnet mask value along with agentLanMngInfListAction, agentLanMngInfListIpAddr and agentLanMngInfListPriority.

What is agentLanMngInfListIpNetMask?

Specifies the subnet mask paired with agentLanMngInfListIpAddr so a rule can match an entire subnet instead of a single host; use 255.255.255.255 to restrict the rule to one exact address. Admins set a broader mask here to permit or deny a whole management VLAN in one rule.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.11.11.3.3.1.4
snmpwalk -v2c -c public <target> NETGEAR-MGMT-SECURITY-MIB::agentLanMngInfListIpNetMask

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.11.11.3.3.1.4.1
snmpget -v2c -c public <target> NETGEAR-MGMT-SECURITY-MIB::agentLanMngInfListIpNetMask.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.11.11.3.3.1.4.1 a <value>

Start monitoring Netgear FastPath-based managed switch (management-plane ACL) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-MGMT-SECURITY-MIB::agentLanMngInfListIpNetMask OID value, configure state conditions and alerts, and monitor any Netgear FastPath-based managed switch (management-plane ACL) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4526netgearFSM726S-MIB
1.3.6.1.4.1.4526.11ng700smartswitchNetgear-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4526.11.11agentMgmtSecurityNETGEAR-MGMT-SECURITY-MIB
1.3.6.1.4.1.4526.11.11.3agentACALConfigGroupNETGEAR-MGMT-SECURITY-MIB
1.3.6.1.4.1.4526.11.11.3.3agentLanMngInfListTableNETGEAR-MGMT-SECURITY-MIB
1.3.6.1.4.1.4526.11.11.3.3.1agentLanMngInfListEntryNETGEAR-MGMT-SECURITY-MIB
1.3.6.1.4.1.4526.11.11.3.3.1.4agentLanMngInfListIpNetMaskNETGEAR-MGMT-SECURITY-MIB