All MIBs › NETGEAR-DOT1X-ADVANCED-FEATURES-MIB › agentDot1xPortControlMode
agentDot1xPortControlMode
Module: NETGEAR-DOT1X-ADVANCED-FEATURES-MIB
OID (symbolic): NETGEAR-DOT1X-ADVANCED-FEATURES-MIB::agentDot1xPortControlMode
OID (numeric): 1.3.6.1.4.1.4526.10.36.2.1.1.1
Node type: OBJECT-TYPE
Type: Dot1xPortControlMode
Access: read-write
Description: Dot1x port control mode of this port.The Port control mode . The port control mode for this interface can take the following values , force-unauthorized - the port is in unauthorized mode, auto-Port based mode. If a client authenticates suscessfully, then the interface is authorized . Otherwise, the port is in unauthorized mode. If more than one clients are attached to the port , then only one client needs to authenticate to allow other clients access. force-authorized - The port is placed in authorized mode macBased - If more than one client is attached to the port, then each client needs to authenticate separately. This object depcreates dot1xAuthAuthControlledPortControl object in IEEE8021-PAE-MIB
What is agentDot1xPortControlMode?
Sets how a port enforces 802.1X: force-unauthorized always blocks it, force-authorized always allows it, auto (the default) requires one client to authenticate before granting access to all devices on the port, and macBased requires every individual client on the port to authenticate separately. It supersedes the older dot1xAuthAuthControlledPortControl object from IEEE8021-PAE-MIB.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.10.36.2.1.1.1 snmpwalk -v2c -c public <target> NETGEAR-DOT1X-ADVANCED-FEATURES-MIB::agentDot1xPortControlMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.10.36.2.1.1.1.1 snmpget -v2c -c public <target> NETGEAR-DOT1X-ADVANCED-FEATURES-MIB::agentDot1xPortControlMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.10.36.2.1.1.1.1 s <value>
Start monitoring Netgear managed switch (FastPath-based, 802.1X advanced features) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-DOT1X-ADVANCED-FEATURES-MIB::agentDot1xPortControlMode OID value, configure state conditions and alerts, and monitor any Netgear managed switch (FastPath-based, 802.1X advanced features) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4526 | netgear | FSM726S-MIB |
| 1.3.6.1.4.1.4526.10 | ng7000managedswitch | Netgear-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4526.10.36 | fastPathdot1xAdvanced | NETGEAR-DOT1X-ADVANCED-FEATURES-MIB |
| 1.3.6.1.4.1.4526.10.36.2 | agentDot1xPortConfigGroup | NETGEAR-DOT1X-ADVANCED-FEATURES-MIB |
| 1.3.6.1.4.1.4526.10.36.2.1 | agentDot1xPortConfigTable | NETGEAR-DOT1X-ADVANCED-FEATURES-MIB |
| 1.3.6.1.4.1.4526.10.36.2.1.1 | agentDot1xPortConfigEntry | NETGEAR-DOT1X-ADVANCED-FEATURES-MIB |
| 1.3.6.1.4.1.4526.10.36.2.1.1.1 | agentDot1xPortControlMode | NETGEAR-DOT1X-ADVANCED-FEATURES-MIB |