All MIBs › NBS-SYSLOG-SERVER-MIB › nbsSyslogServerStatus
nbsSyslogServerStatus
Module: NBS-SYSLOG-SERVER-MIB
OID (symbolic): NBS-SYSLOG-SERVER-MIB::nbsSyslogServerStatus
OID (numeric): 1.3.6.1.4.1.629.206.1.2.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to get/set the validity of the information contained by nbsSyslogServerEntry row.
Setting this object to the value invalid(1) has the effect of deleting the corresponding nbsSyslogServerTable entry. Deleting an entry has the effect of initializing it to default values : IpAddr = 0.0.0.0, Port = 0 etc.
Setting this object to the value active(2) entry has the effect of creating a new row in the nbsSyslogServerTable object, if an entry with the same nbsSyslogServerIpAddr does not exist. If such an entry exists, then a 'badValue' error will be returned.
The GET operations will receive a value of active(2) for existing entries. An invalid(1) value indicates an entry that was deleted by a previous SET operation.
What is nbsSyslogServerStatus?
This object controls whether a syslog server table entry is active or has been deleted, following the table's create/delete-by-status convention. Admins set it to active to enable a new syslog server destination, or to invalid to remove one, resetting its address and port to defaults. For example, setting nbsSyslogServerStatus to invalid(1) removes that server from the list of destinations receiving syslog messages.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.629.206.1.2.1.2 snmpwalk -v2c -c public <target> NBS-SYSLOG-SERVER-MIB::nbsSyslogServerStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.629.206.1.2.1.2.1 snmpget -v2c -c public <target> NBS-SYSLOG-SERVER-MIB::nbsSyslogServerStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.629.206.1.2.1.2.1 i <value>
Start monitoring NBS-branded network switch/router (remote syslog server configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NBS-SYSLOG-SERVER-MIB::nbsSyslogServerStatus OID value, configure state conditions and alerts, and monitor any NBS-branded network switch/router (remote syslog server configuration) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.629 | nbase | CORE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.629.206 | nbsSyslogServerMib | NBS-SYSLOG-SERVER-MIB |
| 1.3.6.1.4.1.629.206.1 | nbsSyslogServerGrp | NBS-SYSLOG-SERVER-MIB |
| 1.3.6.1.4.1.629.206.1.2 | nbsSyslogServerTable | NBS-SYSLOG-SERVER-MIB |
| 1.3.6.1.4.1.629.206.1.2.1 | nbsSyslogServerEntry | NBS-SYSLOG-SERVER-MIB |
| 1.3.6.1.4.1.629.206.1.2.1.2 | nbsSyslogServerStatus | NBS-SYSLOG-SERVER-MIB |