All MIBs › NBS-ROADM-MIB › nbsRoadmCommonStagingQuickCfg
nbsRoadmCommonStagingQuickCfg
Module: NBS-ROADM-MIB
OID (symbolic): NBS-ROADM-MIB::nbsRoadmCommonStagingQuickCfg
OID (numeric): 1.3.6.1.4.1.629.235.10.2.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Impulse object used to replace this port's current nbsRoadmStagingTable entries with a known configuration.
Users may create the nbsRoadmStagingTable manually, a row at a time. Often it would save the users much work if they could initially populate this table with a standard or known configuration and then customize it to their own requirements.
When read, this object will indicate whether this feature is available by reporting either notSupported(1) or supported(2).
The value std100Ghz(3) overwrites this port's nbsRoadmStagingTable with all the standard 100 GHz ITU grid channels which are supported by this port.
The value std50Ghz(4) overwrites this port's nbsRoadmStagingTable with all the standard 50 GHz ITU grid channels which are supported by this port.
Overwriting the nbsRoadmStagingTable entries has no effect on the live configuration until committed using nbsRoadmCommonStagingCommit
What is nbsRoadmCommonStagingQuickCfg?
Read-write control that replaces this port's entire nbsRoadmStagingTable with a known-good configuration in one step: reading it reports whether the feature is supported, and writing std100Ghz or std50Ghz preloads all the standard ITU-grid channels for that spacing so an admin can start from a template instead of building the staging table row by row. Changes only affect the staging area until committed with nbsRoadmCommonStagingCommit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.629.235.10.2.1.10 snmpwalk -v2c -c public <target> NBS-ROADM-MIB::nbsRoadmCommonStagingQuickCfg
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.629.235.10.2.1.10.1 snmpget -v2c -c public <target> NBS-ROADM-MIB::nbsRoadmCommonStagingQuickCfg.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.629.235.10.2.1.10.1 i <value>
Start monitoring NBS/Nortel ROADM optical network element with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NBS-ROADM-MIB::nbsRoadmCommonStagingQuickCfg OID value, configure state conditions and alerts, and monitor any NBS/Nortel ROADM optical network element from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.629 | nbase | CORE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.629.235 | nbsRoadmMib | NBS-ROADM-MIB |
| 1.3.6.1.4.1.629.235.10 | nbsRoadmCommonGrp | NBS-ROADM-MIB |
| 1.3.6.1.4.1.629.235.10.2 | nbsRoadmCommonTable | NBS-ROADM-MIB |
| 1.3.6.1.4.1.629.235.10.2.1 | nbsRoadmCommonEntry | NBS-ROADM-MIB |
| 1.3.6.1.4.1.629.235.10.2.1.10 | nbsRoadmCommonStagingQuickCfg | NBS-ROADM-MIB |