All MIBs › NBS-NTP-MIB › nbsNtpServerStatus
nbsNtpServerStatus
Module: NBS-NTP-MIB
OID (symbolic): NBS-NTP-MIB::nbsNtpServerStatus
OID (numeric): 1.3.6.1.4.1.629.200.9.1.3.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to get/set the validity of the information contained by nbsNtpServerEntry row.
Setting this object to the value invalid(1) has the effect of deleting the corresponding nbsNtpServerTable entry. Deleting and entry has the effect of initializing it to default values : IpAddr = 0.0.0.0
Setting this object to the value valid(2) entry has the effect of creating a new row in the nbsNtpServerTable object, if an entry with the same nbsNtpServerIpAddr does not exist. If such an entry exists, then a 'badValue' error will be returned.
The GET operations will receive a value of valid(2) for existing entries. An invalid(1) value indicates an entry that was deleted by a previous SET operation.
What is nbsNtpServerStatus?
This object both reports and controls the existence of an NTP server table entry: setting it to invalid(1) deletes that server entry and resets its IP address back to 0.0.0.0, while setting it to active(2) creates a new entry provided no existing row already uses the same server IP address. An admin uses this to add or remove NTP server entries via SNMP, since a GET on an existing entry always returns active(2) while an invalid(1) read confirms a prior deletion. For example, setting nbsNtpServerStatus to invalid(1) on an entry removes that NTP server from the configured list, resetting its address back to 0.0.0.0.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.629.200.9.1.3.1.2 snmpwalk -v2c -c public <target> NBS-NTP-MIB::nbsNtpServerStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.629.200.9.1.3.1.2.1 snmpget -v2c -c public <target> NBS-NTP-MIB::nbsNtpServerStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.629.200.9.1.3.1.2.1 i <value>
Start monitoring NBS network device (NTP server synchronization) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NBS-NTP-MIB::nbsNtpServerStatus OID value, configure state conditions and alerts, and monitor any NBS network device (NTP server synchronization) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.629 | nbase | CORE-MIB |
| 1.3.6.1.4.1.629.200 | nbsCmmcMib | NBS-CMMC-MIB |
| 1.3.6.1.4.1.629.200.9 | nbsCmmcNtpGrp | NBS-CMMC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.629.200.9.1 | nbsNtpMib | NBS-NTP-MIB |
| 1.3.6.1.4.1.629.200.9.1.3 | nbsNtpServerTable | NBS-NTP-MIB |
| 1.3.6.1.4.1.629.200.9.1.3.1 | nbsNtpServerEntry | NBS-NTP-MIB |
| 1.3.6.1.4.1.629.200.9.1.3.1.2 | nbsNtpServerStatus | NBS-NTP-MIB |