NBS-CMMC-MIB :: nbsCmmcPortRemoteLoopback

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › NBS-CMMC-MIB › nbsCmmcPortRemoteLoopback

nbsCmmcPortRemoteLoopback

Module: NBS-CMMC-MIB

OID (symbolic): NBS-CMMC-MIB::nbsCmmcPortRemoteLoopback

OID (numeric): 1.3.6.1.4.1.629.200.8.1.1.19

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Indicates whether port should perform Remote Loopback.

When on (3), outbound traffic is returned to the ingress port. In other words, traffic comes from one of the module's other ports to get to this one, and upon arriving here gets sent back to that other port, from where it continues on back to the originator of the traffic.

The related object nbsCmmcPortLoopback may be forced off(2) whenever this object is set to on(3).

What is nbsCmmcPortRemoteLoopback?

When set on(3), causes this port's outbound traffic to be looped straight back toward the ingress port it came from, bouncing traffic that arrived from one of the module's other ports back out to that same originating port; this may also force nbsCmmcPortLoopback off. Technicians use this to test a remote link end-to-end without needing physical access to that far-end device.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.629.200.8.1.1.19
snmpwalk -v2c -c public <target> NBS-CMMC-MIB::nbsCmmcPortRemoteLoopback

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.629.200.8.1.1.19.1
snmpget -v2c -c public <target> NBS-CMMC-MIB::nbsCmmcPortRemoteLoopback.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.629.200.8.1.1.19.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> nbsCmmcPortRemoteLoopback.1

Start monitoring NBS chassis-based network shelf/multiplexer equipment (CMMC-controlled) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NBS-CMMC-MIB::nbsCmmcPortRemoteLoopback OID value, configure state conditions and alerts, and monitor any NBS chassis-based network shelf/multiplexer equipment (CMMC-controlled) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.629nbaseCORE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.629.200nbsCmmcMibNBS-CMMC-MIB
1.3.6.1.4.1.629.200.8nbsCmmcPortGrpNBS-CMMC-MIB
1.3.6.1.4.1.629.200.8.1nbsCmmcPortTableNBS-CMMC-MIB
1.3.6.1.4.1.629.200.8.1.1nbsCmmcPortEntryNBS-CMMC-MIB
1.3.6.1.4.1.629.200.8.1.1.19nbsCmmcPortRemoteLoopbackNBS-CMMC-MIB