All MIBs › NBS-CMMC-MIB › nbsCmmcPortRedundantTxMode
nbsCmmcPortRedundantTxMode
Module: NBS-CMMC-MIB
OID (symbolic): NBS-CMMC-MIB::nbsCmmcPortRedundantTxMode
OID (numeric): 1.3.6.1.4.1.629.200.8.1.1.78
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This object determines whether or not a redundant port's transmitter should be shut down when that port is on standby.
If both redundant ports are connected (via a Y cable) to the same remote port, use the setting oneColonOne (2). This 1:1 configuration will turn off the standby transmitter so it will not interfere with the active port.
If each redundant port is connected to its own remote port, use the setting onePlusOne(3). 1+1 leaves both transmitters on, so the remote site can read its link status.
Any changes to this object are automatically applied to this port's redundant pair.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.629.200.8.1.1.78 snmpwalk -v2c -c public <target> NBS-CMMC-MIB::nbsCmmcPortRedundantTxMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.629.200.8.1.1.78.1 snmpget -v2c -c public <target> NBS-CMMC-MIB::nbsCmmcPortRedundantTxMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.629.200.8.1.1.78.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.629 | nbs | NBS-CMMC-MIB |
| 1.3.6.1.4.1.629.200 | nbsCmmcMib | NBS-CMMC-MIB |
| 1.3.6.1.4.1.629.200.8 | nbsCmmcPortGrp | NBS-CMMC-MIB |
| 1.3.6.1.4.1.629.200.8.1 | nbsCmmcPortTable | NBS-CMMC-MIB |
| 1.3.6.1.4.1.629.200.8.1.1 | nbsCmmcPortEntry | NBS-CMMC-MIB |
| 1.3.6.1.4.1.629.200.8.1.1.78 | nbsCmmcPortRedundantTxMode | NBS-CMMC-MIB |