All MIBs › NAT › rtrcfRtholdintv
rtrcfRtholdintv
Module: NAT
OID (symbolic): NAT::rtrcfRtholdintv
OID (numeric): 1.3.6.1.4.1.86.2.8.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
What is rtrcfRtholdintv?
No DESCRIPTION exists in the source, so this reading is inferred from the INTEGER syntax, read-write access, and its position next to rtrcfRtdownintv. It sets a hold-down interval during which a route already marked down is kept in the table (rather than immediately purged) to prevent route flapping while the network stabilizes. An admin increases this on unstable links to avoid routing churn from a route repeatedly flapping up and down.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.86.2.8.1.3 snmpwalk -v2c -c public <target> NAT::rtrcfRtholdintv
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.86.2.8.1.3.1 snmpget -v2c -c public <target> NAT::rtrcfRtholdintv.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.86.2.8.1.3.1 i <value>
Start monitoring NAT-capable router/firewall (vendor unspecified) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NAT::rtrcfRtholdintv OID value, configure state conditions and alerts, and monitor any NAT-capable router/firewall (vendor unspecified) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.86 | nat | CMU-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.86.2 | natmib | NAT |
| 1.3.6.1.4.1.86.2.8 | natrtr | NAT |
| 1.3.6.1.4.1.86.2.8.1 | rtrcfg | NAT |
| 1.3.6.1.4.1.86.2.8.1.3 | rtrcfRtholdintv | NAT |