NAT :: rtrcfProxyarp

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › NAT › rtrcfProxyarp

rtrcfProxyarp

Module: NAT

OID (symbolic): NAT::rtrcfProxyarp

OID (numeric): 1.3.6.1.4.1.86.2.8.1.5.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

What is rtrcfProxyarp?

This MIB has no DESCRIPTION anywhere, so this reading is inferred from the enabled(1)/disabled(2) enumeration, the inline comments 'proxy ARP enabled'/'proxy ARP disabled', and read-write access. It turns Proxy ARP on or off for this router interface, letting the router answer ARP requests on behalf of hosts on the other side of the link. An admin enables this when hosts on one segment need to reach hosts on another segment as if they were on the same local network.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.86.2.8.1.5.1.1
snmpwalk -v2c -c public <target> NAT::rtrcfProxyarp

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.86.2.8.1.5.1.1.1
snmpget -v2c -c public <target> NAT::rtrcfProxyarp.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.86.2.8.1.5.1.1.1 i <value>

Start monitoring NAT-capable router/firewall (vendor unspecified) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NAT::rtrcfProxyarp OID value, configure state conditions and alerts, and monitor any NAT-capable router/firewall (vendor unspecified) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.86natCMU-MIB
Numeric OIDNameModule
1.3.6.1.4.1.86.2natmibNAT
1.3.6.1.4.1.86.2.8natrtrNAT
1.3.6.1.4.1.86.2.8.1rtrcfgNAT
1.3.6.1.4.1.86.2.8.1.5rtrcfIfTableNAT
1.3.6.1.4.1.86.2.8.1.5.1rtrcfIfEntryNAT
1.3.6.1.4.1.86.2.8.1.5.1.1rtrcfProxyarpNAT