peakSmplIntv
Module: NAT
OID (symbolic): NAT::peakSmplIntv
OID (numeric): 1.3.6.1.4.1.86.2.5.2.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
What is peakSmplIntv?
No DESCRIPTION exists in the source, so this reading is inferred from the INTEGER syntax, read-write access, and its position between peakResetTime and the peak-value objects. It sets the sampling interval, in seconds, over which the meter computes each of its peak values. An admin would shorten this interval to catch brief traffic spikes, or lengthen it to smooth out normal variation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.86.2.5.2.3 snmpwalk -v2c -c public <target> NAT::peakSmplIntv
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.86.2.5.2.3.1 snmpget -v2c -c public <target> NAT::peakSmplIntv.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.86.2.5.2.3.1 i <value>
Start monitoring NAT-capable router/firewall (vendor unspecified) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NAT::peakSmplIntv OID value, configure state conditions and alerts, and monitor any NAT-capable router/firewall (vendor unspecified) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.86 | nat | CMU-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.86.2 | natmib | NAT |
| 1.3.6.1.4.1.86.2.5 | natmtr | NAT |
| 1.3.6.1.4.1.86.2.5.2 | peakInfo | NAT |
| 1.3.6.1.4.1.86.2.5.2.3 | peakSmplIntv | NAT |