All MIBs › NAT › peakErrXmtColls
peakErrXmtColls
Module: NAT
OID (symbolic): NAT::peakErrXmtColls
OID (numeric): 1.3.6.1.4.1.86.2.5.2.4.5.6
Node type: OBJECT-TYPE
Type: Counter
Access: read-only
What is peakErrXmtColls?
No DESCRIPTION exists in the source, so this reading is inferred from the Counter syntax and its position in the peakErrInfo group. It reports how many of the errors during the peak-error interval were transmit collisions. A high value here versus low CRC/alignment counts would point an admin toward congestion or a duplex mismatch rather than a cabling fault.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.86.2.5.2.4.5.6 snmpwalk -v2c -c public <target> NAT::peakErrXmtColls
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.86.2.5.2.4.5.6.1 snmpget -v2c -c public <target> NAT::peakErrXmtColls.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> peakErrXmtColls.1
Start monitoring NAT-capable router/firewall (vendor unspecified) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NAT::peakErrXmtColls OID value, configure state conditions and alerts, and monitor any NAT-capable router/firewall (vendor unspecified) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.86 | nat | CMU-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.86.2 | natmib | NAT |
| 1.3.6.1.4.1.86.2.5 | natmtr | NAT |
| 1.3.6.1.4.1.86.2.5.2 | peakInfo | NAT |
| 1.3.6.1.4.1.86.2.5.2.4 | peakData | NAT |
| 1.3.6.1.4.1.86.2.5.2.4.5 | peakErrInfo | NAT |
| 1.3.6.1.4.1.86.2.5.2.4.5.6 | peakErrXmtColls | NAT |