peakErrCrcs
Module: NAT
OID (symbolic): NAT::peakErrCrcs
OID (numeric): 1.3.6.1.4.1.86.2.5.2.4.5.4
Node type: OBJECT-TYPE
Type: Counter
Access: read-only
What is peakErrCrcs?
No DESCRIPTION text is present in the source, so this reading is inferred from the Counter syntax and its position in the peakErrInfo group, alongside sibling error-type breakdown columns. It reports how many of the errors during the peak-error interval were specifically CRC/checksum failures. An admin uses this breakdown to tell whether the worst error burst was driven by cabling/physical-layer trouble (CRC) rather than collisions or oversized frames.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.86.2.5.2.4.5.4 snmpwalk -v2c -c public <target> NAT::peakErrCrcs
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.86.2.5.2.4.5.4.1 snmpget -v2c -c public <target> NAT::peakErrCrcs.1
Start monitoring NAT-capable router/firewall (vendor unspecified) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NAT::peakErrCrcs OID value, configure state conditions and alerts, and monitor any NAT-capable router/firewall (vendor unspecified) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.86 | nat | CMU-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.86.2 | natmib | NAT |
| 1.3.6.1.4.1.86.2.5 | natmtr | NAT |
| 1.3.6.1.4.1.86.2.5.2 | peakInfo | NAT |
| 1.3.6.1.4.1.86.2.5.2.4 | peakData | NAT |
| 1.3.6.1.4.1.86.2.5.2.4.5 | peakErrInfo | NAT |
| 1.3.6.1.4.1.86.2.5.2.4.5.4 | peakErrCrcs | NAT |