All MIBs › NAT › peakBcastErrors
peakBcastErrors
Module: NAT
OID (symbolic): NAT::peakBcastErrors
OID (numeric): 1.3.6.1.4.1.86.2.5.2.4.3.4
Node type: OBJECT-TYPE
Type: Counter
Access: read-only
What is peakBcastErrors?
This MIB has no DESCRIPTION anywhere, so this reading is inferred from the Counter syntax and its position in the peakBcastInfo group. It counts errors observed during the peak-broadcast interval. An admin checks this to see whether the broadcast spike coincided with increased error rates on the segment.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.86.2.5.2.4.3.4 snmpwalk -v2c -c public <target> NAT::peakBcastErrors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.86.2.5.2.4.3.4.1 snmpget -v2c -c public <target> NAT::peakBcastErrors.1
Start monitoring NAT-capable router/firewall (vendor unspecified) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NAT::peakBcastErrors OID value, configure state conditions and alerts, and monitor any NAT-capable router/firewall (vendor unspecified) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.86 | nat | CMU-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.86.2 | natmib | NAT |
| 1.3.6.1.4.1.86.2.5 | natmtr | NAT |
| 1.3.6.1.4.1.86.2.5.2 | peakInfo | NAT |
| 1.3.6.1.4.1.86.2.5.2.4 | peakData | NAT |
| 1.3.6.1.4.1.86.2.5.2.4.3 | peakBcastInfo | NAT |
| 1.3.6.1.4.1.86.2.5.2.4.3.4 | peakBcastErrors | NAT |