opTrapInact
Module: NAT
OID (symbolic): NAT::opTrapInact
OID (numeric): 1.3.6.1.4.1.86.2.3.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
What is opTrapInact?
No DESCRIPTION exists in the source, so this reading is inferred from the off(0)/on(1) enumeration and read-write access. Setting it to on(1) suppresses trap generation while the device is in an inactive state, avoiding an alert storm during known/expected downtime. An admin would enable this before planned maintenance so the device doesn't flood the NMS with traps while it's intentionally offline.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.86.2.3.3 snmpwalk -v2c -c public <target> NAT::opTrapInact
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.86.2.3.3.1 snmpget -v2c -c public <target> NAT::opTrapInact.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.86.2.3.3.1 i <value>
Start monitoring NAT-capable router/firewall (vendor unspecified) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NAT::opTrapInact OID value, configure state conditions and alerts, and monitor any NAT-capable router/firewall (vendor unspecified) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.86 | nat | CMU-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.86.2 | natmib | NAT |
| 1.3.6.1.4.1.86.2.3 | natopr | NAT |
| 1.3.6.1.4.1.86.2.3.3 | opTrapInact | NAT |