NAT :: cfAcchostCfgAcclvl

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › NAT › cfAcchostCfgAcclvl

cfAcchostCfgAcclvl

Module: NAT

OID (symbolic): NAT::cfAcchostCfgAcclvl

OID (numeric): 1.3.6.1.4.1.86.2.1.8.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

What is cfAcchostCfgAcclvl?

No DESCRIPTION exists in the source file, so this reading is inferred from the enumerated command values (cfDelet, cfAddReadStd, cfAddReadEnterprise, cfAddTrap, cfAddReadwrite) and read-write access. Writing one of these values against a host's row adds that host to the access-host table at the named level, or deletes it if cfDelet(0) is written. For example, an admin would SET cfAddReadwrite(4) against a new NMS's row to grant it full read-write management access.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.86.2.1.8.1.1
snmpwalk -v2c -c public <target> NAT::cfAcchostCfgAcclvl

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.86.2.1.8.1.1.1
snmpget -v2c -c public <target> NAT::cfAcchostCfgAcclvl.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.86.2.1.8.1.1.1 i <value>

Start monitoring NAT-capable router/firewall (vendor unspecified) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NAT::cfAcchostCfgAcclvl OID value, configure state conditions and alerts, and monitor any NAT-capable router/firewall (vendor unspecified) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.86natCMU-MIB
Numeric OIDNameModule
1.3.6.1.4.1.86.2natmibNAT
1.3.6.1.4.1.86.2.1configurationNAT
1.3.6.1.4.1.86.2.1.8cfAcchostCfgTableNAT
1.3.6.1.4.1.86.2.1.8.1cfAcchostCfgEntryNAT
1.3.6.1.4.1.86.2.1.8.1.1cfAcchostCfgAcclvlNAT