All MIBs › Modem-MIB › mdmSCModulationSchemeUsed
mdmSCModulationSchemeUsed
Module: Modem-MIB
OID (symbolic): Modem-MIB::mdmSCModulationSchemeUsed
OID (numeric): 1.3.6.1.2.1.38.1.1.11.1.5
Node type: OBJECT-TYPE
Type: OBJECT IDENTIFIER
Access: read-only
Description: The modulation scheme of the current or previous call. This shall be one of the values for modulation protocols registered in the capabilities table for this modem.
What is mdmSCModulationSchemeUsed?
Reports which modulation scheme (identified by OID, referencing the capabilities table, e.g. a specific V.xx standard) was used for the current or previous call, which an admin checks to confirm the modem negotiated the expected protocol with the remote end.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.38.1.1.11.1.5 snmpwalk -v2c -c public <target> Modem-MIB::mdmSCModulationSchemeUsed
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.38.1.1.11.1.5.1 snmpget -v2c -c public <target> Modem-MIB::mdmSCModulationSchemeUsed.1
Start monitoring Vendor-neutral IETF standard (dial-up modem) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Modem-MIB::mdmSCModulationSchemeUsed OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (dial-up modem) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.38 | mdmMIB | Modem-MIB |
| 1.3.6.1.2.1.38.1.1 | mdmMIBObjects | Modem-MIB |
| 1.3.6.1.2.1.38.1.1.11 | mdmSCTable | Modem-MIB |
| 1.3.6.1.2.1.38.1.1.11.1 | mdmSCEntry | Modem-MIB |
| 1.3.6.1.2.1.38.1.1.11.1.5 | mdmSCModulationSchemeUsed | Modem-MIB |