All MIBs › Modem-MIB › mdmECErrorControlUsed
mdmECErrorControlUsed
Module: Modem-MIB
OID (symbolic): Modem-MIB::mdmECErrorControlUsed
OID (numeric): 1.3.6.1.2.1.38.1.1.9.1.1
Node type: OBJECT-TYPE
Type: OBJECT IDENTIFIER
Access: read-only
Description: Indicates the error control method used during the current or previous call. This shall be one of the values for error control protocols registered in the capabilities table for this modem. If no error control protocol is in use, this object shall have the value '{0 0}'.
What is mdmECErrorControlUsed?
Reports which error-control protocol (identified by OID, referencing an entry in the capabilities table) was used on the current or previous call, or {0 0} if none was used, letting an admin confirm whether error correction like MNP or V.42 was actually negotiated.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.38.1.1.9.1.1 snmpwalk -v2c -c public <target> Modem-MIB::mdmECErrorControlUsed
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.38.1.1.9.1.1.1 snmpget -v2c -c public <target> Modem-MIB::mdmECErrorControlUsed.1
Start monitoring Vendor-neutral IETF standard (dial-up modem) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Modem-MIB::mdmECErrorControlUsed OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (dial-up modem) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.38 | mdmMIB | Modem-MIB |
| 1.3.6.1.2.1.38.1.1 | mdmMIBObjects | Modem-MIB |
| 1.3.6.1.2.1.38.1.1.9 | mdmECTable | Modem-MIB |
| 1.3.6.1.2.1.38.1.1.9.1 | mdmECEntry | Modem-MIB |
| 1.3.6.1.2.1.38.1.1.9.1.1 | mdmECErrorControlUsed | Modem-MIB |