Modem-MIB :: mdmCCRingsBeforeAnswer

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Modem-MIB › mdmCCRingsBeforeAnswer

mdmCCRingsBeforeAnswer

Module: Modem-MIB

OID (symbolic): Modem-MIB::mdmCCRingsBeforeAnswer

OID (numeric): 1.3.6.1.2.1.38.1.1.7.1.1

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: Determines which ring the modem will wait to answer the phone on. If this value is `0', the modem will not go offhook and answer a call when a ring signal is detected.

What is mdmCCRingsBeforeAnswer?

Sets which incoming ring the modem waits for before answering, defaulting to 1, with 0 meaning the modem never auto-answers; an admin raises this to delay answering, for example to let a different device pick up first.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.38.1.1.7.1.1
snmpwalk -v2c -c public <target> Modem-MIB::mdmCCRingsBeforeAnswer

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.38.1.1.7.1.1.1
snmpget -v2c -c public <target> Modem-MIB::mdmCCRingsBeforeAnswer.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.38.1.1.7.1.1.1 i <value>

Start monitoring Vendor-neutral IETF standard (dial-up modem) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Modem-MIB::mdmCCRingsBeforeAnswer OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (dial-up modem) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.38mdmMIBModem-MIB
1.3.6.1.2.1.38.1.1mdmMIBObjectsModem-MIB
1.3.6.1.2.1.38.1.1.7mdmCallControlTableModem-MIB
1.3.6.1.2.1.38.1.1.7.1mdmCallControlEntryModem-MIB
1.3.6.1.2.1.38.1.1.7.1.1mdmCCRingsBeforeAnswerModem-MIB