Modem-MIB :: mdmCCResultCodeEnable

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Modem-MIB › mdmCCResultCodeEnable

mdmCCResultCodeEnable

Module: Modem-MIB

OID (symbolic): Modem-MIB::mdmCCResultCodeEnable

OID (numeric): 1.3.6.1.2.1.38.1.1.7.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: When disabled, the DCE shall issue no 'result codes' of any kind to the DTE either in response to unsolicited events (eg. ring signal), or commands. In TIA-602, this is controlled by the ATQ command. When numericEnabled, the DCE shall issue result codes in numeric form. When verboseEnabled, the DCE shall issue result codes in a verbose, textual form.

What is mdmCCResultCodeEnable?

Controls whether the modem reports result codes to the DTE at all, and in what form, disabled, numeric, or verbose text, defaulting to verbose; an admin sets this to disabled when a script or application expects silence rather than status text on the serial line.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.38.1.1.7.1.3
snmpwalk -v2c -c public <target> Modem-MIB::mdmCCResultCodeEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.38.1.1.7.1.3.1
snmpget -v2c -c public <target> Modem-MIB::mdmCCResultCodeEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.38.1.1.7.1.3.1 i <value>

Start monitoring Vendor-neutral IETF standard (dial-up modem) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Modem-MIB::mdmCCResultCodeEnable OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (dial-up modem) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.38mdmMIBModem-MIB
1.3.6.1.2.1.38.1.1mdmMIBObjectsModem-MIB
1.3.6.1.2.1.38.1.1.7mdmCallControlTableModem-MIB
1.3.6.1.2.1.38.1.1.7.1mdmCallControlEntryModem-MIB
1.3.6.1.2.1.38.1.1.7.1.3mdmCCResultCodeEnableModem-MIB