All MIBs › MWRM-UNIT-MIB › genEquipProtectionRevertiveMaxNumOfTries
genEquipProtectionRevertiveMaxNumOfTries
Module: MWRM-UNIT-MIB
OID (symbolic): MWRM-UNIT-MIB::genEquipProtectionRevertiveMaxNumOfTries
OID (numeric): 1.3.6.1.4.1.2281.10.1.6.15
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Maximal number of revertive protection tries. Used to prevent instability. Revertive protection will give up trying to switch to the primary standby IDU path after the maximal number of tries. Setting Zero value will enable revertive protection switch only if the last protection switch was due to a local equipment failure.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2281.10.1.6.15 snmpwalk -v2c -c public <target> MWRM-UNIT-MIB::genEquipProtectionRevertiveMaxNumOfTries
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2281.10.1.6.15.1 snmpget -v2c -c public <target> MWRM-UNIT-MIB::genEquipProtectionRevertiveMaxNumOfTries.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2281.10.1.6.15.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2281 | microwave_radio | MWRM-UNIT-MIB |
| 1.3.6.1.4.1.2281.10 | genEquip | MWRM-UNIT-MIB |
| 1.3.6.1.4.1.2281.10.1 | genEquipUnit | MWRM-UNIT-MIB |
| 1.3.6.1.4.1.2281.10.1.6 | genEquipProtection | MWRM-UNIT-MIB |
| 1.3.6.1.4.1.2281.10.1.6.15 | genEquipProtectionRevertiveMaxNumOfTries | MWRM-UNIT-MIB |