All MIBs › MWRM-UNIT-MIB › genEquipProtectionRevertiveAdmin
genEquipProtectionRevertiveAdmin
Module: MWRM-UNIT-MIB
OID (symbolic): MWRM-UNIT-MIB::genEquipProtectionRevertiveAdmin
OID (numeric): 1.3.6.1.4.1.2281.10.1.6.12
Node type: OBJECT-TYPE
Type: EnableDisable
Access: read-write
Description: Enable/Disable revertive protection mode. In revertive protection mode one IDU will be defined as a Primary and the other will be Secondary. Revertive protection will always tend to make the Primary IDU active unless it has a hardware failure.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2281.10.1.6.12 snmpwalk -v2c -c public <target> MWRM-UNIT-MIB::genEquipProtectionRevertiveAdmin
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2281.10.1.6.12.1 snmpget -v2c -c public <target> MWRM-UNIT-MIB::genEquipProtectionRevertiveAdmin.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2281.10.1.6.12.1 s <value>
Start monitoring Microwave radio link terminal (indoor unit, vendor unconfirmed) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MWRM-UNIT-MIB::genEquipProtectionRevertiveAdmin OID value, configure state conditions and alerts, and monitor any Microwave radio link terminal (indoor unit, vendor unconfirmed) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2281 | ceragon | CERAGON-MIB |
| 1.3.6.1.4.1.2281.10 | genEquip | MWRM-PM-MIB |
| 1.3.6.1.4.1.2281.10.1 | genEquipUnit | MWRM-PM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2281.10.1.6 | genEquipProtection | MWRM-UNIT-MIB |
| 1.3.6.1.4.1.2281.10.1.6.12 | genEquipProtectionRevertiveAdmin | MWRM-UNIT-MIB |