All MIBs › MPLS-MIB › mplsPathInfoHoldPriority
mplsPathInfoHoldPriority
Module: MPLS-MIB
OID (symbolic): MPLS-MIB::mplsPathInfoHoldPriority
OID (numeric): 1.3.6.1.4.1.2636.3.2.5.1.26
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The hold priority configured for this path. This field is meaningless unless mplsPathInfoName is not empty
What is mplsPathInfoHoldPriority?
This value (0-7) reports the hold priority configured for an LSP's active path, used to decide whether this LSP can be preempted by a new higher-priority LSP once established; meaningless if mplsPathInfoName is empty. Admins tune setup versus hold priority together to control which tunnels can bump which others during congestion.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.2.5.1.26 snmpwalk -v2c -c public <target> MPLS-MIB::mplsPathInfoHoldPriority
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.2.5.1.26.1 snmpget -v2c -c public <target> MPLS-MIB::mplsPathInfoHoldPriority.1
Start monitoring Juniper Networks router (MPLS traffic engineering) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-MIB::mplsPathInfoHoldPriority OID value, configure state conditions and alerts, and monitor any Juniper Networks router (MPLS traffic engineering) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.2 | mpls | MPLS-MIB |
| 1.3.6.1.4.1.2636.3.2.5 | mplsLspInfoList | MPLS-MIB |
| 1.3.6.1.4.1.2636.3.2.5.1 | mplsLspInfoEntry | MPLS-MIB |
| 1.3.6.1.4.1.2636.3.2.5.1.26 | mplsPathInfoHoldPriority | MPLS-MIB |