All MIBs › MPLS-MIB › mplsPathInfoBandwidth
mplsPathInfoBandwidth
Module: MPLS-MIB
OID (symbolic): MPLS-MIB::mplsPathInfoBandwidth
OID (numeric): 1.3.6.1.4.1.2636.3.2.5.1.21
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The configured bandwidth for this LSP, in units of thousands of bits per second (Kbps). This field is meaningless unless mplsPathInfoName is not empty
What is mplsPathInfoBandwidth?
This value reports the configured bandwidth reserved for an LSP's active path, in Kbps; meaningless if mplsPathInfoName is empty. Admins check this to confirm a tunnel is reserving the bandwidth capacity it was designed to guarantee.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.2.5.1.21 snmpwalk -v2c -c public <target> MPLS-MIB::mplsPathInfoBandwidth
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.2.5.1.21.1 snmpget -v2c -c public <target> MPLS-MIB::mplsPathInfoBandwidth.1
Start monitoring Juniper Networks router (MPLS traffic engineering) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-MIB::mplsPathInfoBandwidth OID value, configure state conditions and alerts, and monitor any Juniper Networks router (MPLS traffic engineering) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.2 | mpls | MPLS-MIB |
| 1.3.6.1.4.1.2636.3.2.5 | mplsLspInfoList | MPLS-MIB |
| 1.3.6.1.4.1.2636.3.2.5.1 | mplsLspInfoEntry | MPLS-MIB |
| 1.3.6.1.4.1.2636.3.2.5.1.21 | mplsPathInfoBandwidth | MPLS-MIB |