All MIBs › MPLS-MIB › mplsLspPathChanges
mplsLspPathChanges
Module: MPLS-MIB
OID (symbolic): MPLS-MIB::mplsLspPathChanges
OID (numeric): 1.3.6.1.4.1.2636.3.2.3.1.10
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: The number of path changes this LSP has had. For every path change (path down, path up, path change), a corresponding syslog/trap (if enabled) is generated for it.
What is mplsLspPathChanges?
This deprecated counter tracked the number of path changes (path down, path up, path change) an LSP had experienced, with each change generating a syslog/trap if enabled. It has been superseded by mplsLspInfoPathChanges.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.2.3.1.10 snmpwalk -v2c -c public <target> MPLS-MIB::mplsLspPathChanges
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.2.3.1.10.1 snmpget -v2c -c public <target> MPLS-MIB::mplsLspPathChanges.1
Start monitoring Juniper Networks router (MPLS traffic engineering) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-MIB::mplsLspPathChanges OID value, configure state conditions and alerts, and monitor any Juniper Networks router (MPLS traffic engineering) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.2 | mpls | MPLS-MIB |
| 1.3.6.1.4.1.2636.3.2.3 | mplsLspList | MPLS-MIB |
| 1.3.6.1.4.1.2636.3.2.3.1 | mplsLspEntry | MPLS-MIB |
| 1.3.6.1.4.1.2636.3.2.3.1.10 | mplsLspPathChanges | MPLS-MIB |