MPLS-MIB :: mplsLspInfoPathChanges

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsMPLS-MIBmplsLspInfoPathChanges

mplsLspInfoPathChanges

Module: MPLS-MIB

OID (symbolic): MPLS-MIB::mplsLspInfoPathChanges

OID (numeric): 1.3.6.1.4.1.2636.3.2.5.1.10

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: The number of path changes this LSP has had. For every path change (path down, path up, path change), a corresponding syslog/trap (if enabled) is generated for it.

What is mplsLspInfoPathChanges?

This counter tracks the number of path changes (path down, path up, path switch) an LSP has experienced; each change generates a syslog message or trap if enabled. Admins watch this for LSPs that are switching paths unusually often, a sign of an unstable network segment.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.2.5.1.10
snmpwalk -v2c -c public <target> MPLS-MIB::mplsLspInfoPathChanges

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.2.5.1.10.1
snmpget -v2c -c public <target> MPLS-MIB::mplsLspInfoPathChanges.1

Start monitoring Juniper Networks router (MPLS traffic engineering) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-MIB::mplsLspInfoPathChanges OID value, configure state conditions and alerts, and monitor any Juniper Networks router (MPLS traffic engineering) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2636juniperMIBJUNIPER-SMI
1.3.6.1.4.1.2636.3jnxMibsJUNIPER-SMI
Numeric OIDNameModule
1.3.6.1.4.1.2636.3.2mplsMPLS-MIB
1.3.6.1.4.1.2636.3.2.5mplsLspInfoListMPLS-MIB
1.3.6.1.4.1.2636.3.2.5.1mplsLspInfoEntryMPLS-MIB
1.3.6.1.4.1.2636.3.2.5.1.10mplsLspInfoPathChangesMPLS-MIB