MPLS-CEM-MIB :: mplsCemVcApsStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › MPLS-CEM-MIB › mplsCemVcApsStatus

mplsCemVcApsStatus

Module: MPLS-CEM-MIB

OID (symbolic): MPLS-CEM-MIB::mplsCemVcApsStatus

OID (numeric): 1.3.6.1.3.9999.1.2.1.34

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: If part of a CEM VC group, this indicates if the CEM VC has been selected (via APS algorithm/protocol) to connect the associated Tunnel to the SONET path. If not part of a group, then always 'active'.

What is mplsCemVcApsStatus?

Reports whether this CEM VC, if part of a protection group, is currently the active(1) member connected to the tunnel and SONET path, or the standby(2) member; a VC not in any group always reads active.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.3.9999.1.2.1.34
snmpwalk -v2c -c public <target> MPLS-CEM-MIB::mplsCemVcApsStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.3.9999.1.2.1.34.1
snmpget -v2c -c public <target> MPLS-CEM-MIB::mplsCemVcApsStatus.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> mplsCemVcApsStatus.1

Start monitoring MPLS edge routers and circuit emulation gateways with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-CEM-MIB::mplsCemVcApsStatus OID value, configure state conditions and alerts, and monitor any MPLS edge routers and circuit emulation gateways from a single console.

OID Breakdown

Upper-level ancestors (5 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.3experimentalAPERTUS-NPG-MIB
Numeric OIDNameModule
1.3.6.1.3.9999mplsCemMIBMPLS-CEM-MIB
1.3.6.1.3.9999.1mplsCemObjectsMPLS-CEM-MIB
1.3.6.1.3.9999.1.2mplsCemVcTableMPLS-CEM-MIB
1.3.6.1.3.9999.1.2.1mplsCemVcEntryMPLS-CEM-MIB
1.3.6.1.3.9999.1.2.1.34mplsCemVcApsStatusMPLS-CEM-MIB