MLD-SNOOPING-MIB :: swMldSnoopingGlobalState

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › MLD-SNOOPING-MIB › swMldSnoopingGlobalState

swMldSnoopingGlobalState

Module: MLD-SNOOPING-MIB

OID (symbolic): MLD-SNOOPING-MIB::swMldSnoopingGlobalState

OID (numeric): 1.3.6.1.4.1.171.12.34.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object indicates if the MLD snooping capture function is enabled or disabled.

What is swMldSnoopingGlobalState?

Turns MLD snooping on or off switch-wide; when enabled the switch inspects MLDv1/v2 control packets so it can forward IPv6 multicast traffic only out ports with interested listeners instead of flooding every VLAN port.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.12.34.1.1
snmpwalk -v2c -c public <target> MLD-SNOOPING-MIB::swMldSnoopingGlobalState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.12.34.1.1.1
snmpget -v2c -c public <target> MLD-SNOOPING-MIB::swMldSnoopingGlobalState.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.171.12.34.1.1.1 i <value>

Start monitoring D-Link managed switch (Layer 2/3, MLD snooping) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MLD-SNOOPING-MIB::swMldSnoopingGlobalState OID value, configure state conditions and alerts, and monitor any D-Link managed switch (Layer 2/3, MLD snooping) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.12dlink_common_mgmtDLINK-ID-REC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.12.34swMldSnpMIBMLD-SNOOPING-MIB
1.3.6.1.4.1.171.12.34.1swMldSnpCtrlMLD-SNOOPING-MIB
1.3.6.1.4.1.171.12.34.1.1swMldSnoopingGlobalStateMLD-SNOOPING-MIB