All MIBs › MITEL-TRAPGROUP-MIB › mitelSnmpTrapControl
mitelSnmpTrapControl
Module: MITEL-TRAPGROUP-MIB
OID (symbolic): MITEL-TRAPGROUP-MIB::mitelSnmpTrapControl
OID (numeric): 1.3.6.1.4.1.1027.4.8.1.7.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: A bit string used to represent the enable/disable state of all traps in in the system.
The bit positions are: 1 Cold Start 2 Link Down 4 Link Up 8 Authentication Failure 16 New Root (Rfc 1493) 32 Topology Change (Rfc 1493) 64 Mitel IP Access Restriction 128 Mitel Retry Threshold Reached 256 Mitel DHCP Client Obtained IP 512 Mitel DHCP Client Lease Expired 1024 Mitel Call Control Failed to Seize Line 2048 Mitel Call Control DDI Mapping Error 4096 Mitel Voice Mail Disk Nearly Full 8192 Mitel Voice Mail Disk Full 16384 DSX1 Line Status 32768 Mitel Application Monitor Task Crashed
What is mitelSnmpTrapControl?
This object is a bitmask where each set bit enables a specific category of trap, such as link down, authentication failure, DHCP lease expiry, or a Mitel voice-mail disk full condition. Administrators write a combined bit value to fine-tune exactly which trap types the router will emit, rather than the all-or-nothing switch of mitelSnmpTrapGlobal. For example, writing a value with only bit 8192 set enables just the 'Mitel Voice Mail Disk Full' trap while leaving every other trap type suppressed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1027.4.8.1.7.2 snmpwalk -v2c -c public <target> MITEL-TRAPGROUP-MIB::mitelSnmpTrapControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1027.4.8.1.7.2.1 snmpget -v2c -c public <target> MITEL-TRAPGROUP-MIB::mitelSnmpTrapControl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1027.4.8.1.7.2.1 i <value>
Start monitoring Mitel IP networking router / IP telephony network device (trap notifications) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MITEL-TRAPGROUP-MIB::mitelSnmpTrapControl OID value, configure state conditions and alerts, and monitor any Mitel IP networking router / IP telephony network device (trap notifications) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1027 | mitel | MITEL-APPLICATION-MON-MIB |
| 1.3.6.1.4.1.1027.4 | mitelProprietary | MITEL-APPLICATION-MON-MIB |
| 1.3.6.1.4.1.1027.4.8 | mitelPropIpNetworking | MITEL-DHCP-MIB |
| 1.3.6.1.4.1.1027.4.8.1 | mitelIpNetRouter | MITEL-DHCP-MIB |
| 1.3.6.1.4.1.1027.4.8.1.7 | mitelRouterSnmpTrapGroup | MITEL-IPNETROUTER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1027.4.8.1.7.2 | mitelSnmpTrapControl | MITEL-TRAPGROUP-MIB |