All MIBs › MIP-UDPTUNNEL-MIB › haUdpTunnelKeepaliveInterval
haUdpTunnelKeepaliveInterval
Module: MIP-UDPTUNNEL-MIB
OID (symbolic): MIP-UDPTUNNEL-MIB::haUdpTunnelKeepaliveInterval
OID (numeric): 1.3.6.1.2.1.44.4.1.2.2
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This parameter sets the keepalive interval override. Normally, the MN uses the keepalive time that was configured using UDP tunneling and sending keepalive messages. The HA can override this configured keepalive time by setting a new interval value for this parameter to a value other than zero.
What is haUdpTunnelKeepaliveInterval?
This value, in seconds, lets the Home Agent override the keepalive interval the Mobile Node would otherwise use for its UDP tunnel, by setting a nonzero value here. Admins use it when the home agent's network policy requires a specific keepalive cadence regardless of what individual mobile nodes request. The default 0 means the HA does not override the MN's configured interval; setting it to 60 forces all tunneled mobile nodes served by this HA to keepalive every 60 seconds instead.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.44.4.1.2.2 snmpwalk -v2c -c public <target> MIP-UDPTUNNEL-MIB::haUdpTunnelKeepaliveInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.44.4.1.2.2.1 snmpget -v2c -c public <target> MIP-UDPTUNNEL-MIB::haUdpTunnelKeepaliveInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.44.4.1.2.2.1 i <value>
Start monitoring Vendor-neutral IETF standard (Mobile IP home/foreign agent or mobile node, NAT UDP tunneling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MIP-UDPTUNNEL-MIB::haUdpTunnelKeepaliveInterval OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (Mobile IP home/foreign agent or mobile node, NAT UDP tunneling) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.44 | mipMIB | MIP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.44.4 | mipUdpTunnelMIB | MIP-UDPTUNNEL-MIB |
| 1.3.6.1.2.1.44.4.1 | mipUdpTunnelMIBObjects | MIP-UDPTUNNEL-MIB |
| 1.3.6.1.2.1.44.4.1.2 | haUdpTunnel | MIP-UDPTUNNEL-MIB |
| 1.3.6.1.2.1.44.4.1.2.2 | haUdpTunnelKeepaliveInterval | MIP-UDPTUNNEL-MIB |