All MIBs › MICOM-ISDN-MIB › nvmDialCtlPeerCfgFailureDelay
nvmDialCtlPeerCfgFailureDelay
Module: MICOM-ISDN-MIB
OID (symbolic): MICOM-ISDN-MIB::nvmDialCtlPeerCfgFailureDelay
OID (numeric): 1.3.6.1.4.1.335.1.4.24.1.9.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: NAME = ; DESC = The time in seconds after which call attempts are \ to be placed again after a peer has been noticed \ to be unreachable, i.e. after nvmDialCtlPeerCfgCallRetries \ unsuccessful call attempts. \ A value of zero means that a peer will not be called \ again after nvmDialCtlPeerCfgCallRetries unsuccessful call \ attempts. (Configuration); HELP = This value is the time to wait with another call \ retry after nvmDialCtlPeerCfgCallRetries unsuccessful \ calls. ICM uses the default value of zero, which means \ that a peer will not be called again after \ nvmDialCtlPeerCfgCallRetriesattempts. The whole call \ retry logic will be implemented.; CAPABILITIES = ;
What is nvmDialCtlPeerCfgFailureDelay?
This sets how long, in seconds, to wait before attempting to call this peer again after nvmDialCtlPeerCfgCallRetries unsuccessful attempts have exhausted the retry count; 0 means the peer won't be called again after those retries fail. On this device the default of 0 is used, meaning the built-in retry logic won't automatically resume calling a peer that's given up.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.335.1.4.24.1.9.1.12 snmpwalk -v2c -c public <target> MICOM-ISDN-MIB::nvmDialCtlPeerCfgFailureDelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.335.1.4.24.1.9.1.12.1 snmpget -v2c -c public <target> MICOM-ISDN-MIB::nvmDialCtlPeerCfgFailureDelay.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.335.1.4.24.1.9.1.12.1 i <value>
Start monitoring Micom WAN access router/multiplexer (ISDN BRI/PRI) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MICOM-ISDN-MIB::nvmDialCtlPeerCfgFailureDelay OID value, configure state conditions and alerts, and monitor any Micom WAN access router/multiplexer (ISDN BRI/PRI) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.335 | micom | MICOM-OSCAR-MIB |
| 1.3.6.1.4.1.335.1 | products | MICOM-OSCAR-MIB |
| 1.3.6.1.4.1.335.1.4 | micom_oscar | MICOM-OSCAR-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.335.1.4.24 | micom_isdn | MICOM-ISDN-MIB |
| 1.3.6.1.4.1.335.1.4.24.1 | configuration | MICOM-ISDN-MIB |
| 1.3.6.1.4.1.335.1.4.24.1.9 | nvmDialCtlPeerCfgTable | MICOM-ISDN-MIB |
| 1.3.6.1.4.1.335.1.4.24.1.9.1 | nvmDialCtlPeerCfgEntry | MICOM-ISDN-MIB |
| 1.3.6.1.4.1.335.1.4.24.1.9.1.12 | nvmDialCtlPeerCfgFailureDelay | MICOM-ISDN-MIB |