All MIBs › MERITAGE-MIB › meritageBaseFaultMask
meritageBaseFaultMask
Module: MERITAGE-MIB
OID (symbolic): MERITAGE-MIB::meritageBaseFaultMask
OID (numeric): 1.3.6.1.4.1.81.32.1.4
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: Each bit of this item describes a fault situation in the Meritage hub. bit 1: meritageBaseFanActivityStatus.1 = failed (2), bit 2: meritageBaseFanActivityStatus.2 = failed (2), bit 3: meritageBasePSUActivityStatus.1 = failed(2), bit 4: meritageBasePSUActivityStatus.2 = failed(2), bit 5: meritageBasePSUActivityStatus.3 = failed(2), bit 6: meritageMSPVBackupStatus = failed(2), bit 7: scGenSwitchOldVersionModules.1 = null, bit 8: scGenSwitchOldVersionModules.2 = null, bit 9: scGenSwitchVIDPNonSupportedModules.1 = null, bit 10: scGenSwitchVIDPNonSupportedModules.2 = null, bit 11: scGenSwitchSTAonSupportedModules.1 = null, bit 12: scGenSwitchSTAonSupportedModules.2 = null, bit 13: scGenSwitchIDSonSupportedModules.1 = null, bit 14: scGenSwitchIDSonSupportedModules.2 = null, bit 15: The highest priority source port is not the curent source (according to meritageClockCurrentSource), bit 16: meritageClockStatus is Not in locked (1) for more then 120 seconds AND not all priorities are 0 AND meritageClockAdminStatus = enable (1), bit 17: meritageClockSourceStatus.1 = failed (2), bit 18: meritageClockSourceStatus.2 = failed (2), bit 19: meritageClockSourceStatus.3 = failed (2), bit 20: meritageClockSourceStatus.4 = failed (2),
What is meritageBaseFaultMask?
A bitmask summarizing multiple simultaneous fault conditions across the chassis -- failed fans, failed power supplies, backup M-SPV failure, unsupported modules, and clock-source problems -- each at a documented bit position, so an admin can check one object instead of polling many individual status values.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.81.32.1.4 snmpwalk -v2c -c public <target> MERITAGE-MIB::meritageBaseFaultMask
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.81.32.1.4.1 snmpget -v2c -c public <target> MERITAGE-MIB::meritageBaseFaultMask.1
Start monitoring Meritage chassis-based network switch (fan/PSU/temperature health) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MERITAGE-MIB::meritageBaseFaultMask OID value, configure state conditions and alerts, and monitor any Meritage chassis-based network switch (fan/PSU/temperature health) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.81 | lannet | GEN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.81.32 | meritage | MERITAGE-MIB |
| 1.3.6.1.4.1.81.32.1 | meritageBase | MERITAGE-MIB |
| 1.3.6.1.4.1.81.32.1.4 | meritageBaseFaultMask | MERITAGE-MIB |