All MIBs › LaserJet-Series2100-MIB › tray1_fuser_temperature
tray1_fuser_temperature
Module: LaserJet-Series2100-MIB
OID (symbolic): LaserJet-Series2100-MIB::tray1_fuser_temperature
OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The fuser temperature to be used when printing media from Tray 1. The value zero is the default temperature. Values less than zero are progressively lower and values greater than zero are progressively higher. The range of values supported is device specific. Additional information: HP LaserJet 2100 Series supports 3 fuser temperatures. Zero (0) is the default temperature, one(1) is a higher temperature (for use on media like cardstock), negative one (-1) is a lower temperature (for use on media like transparencies). Setting to an unsupported value causes the printer to snap to the nearest supported value and to return
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.13 snmpwalk -v2c -c public <target> LaserJet-Series2100-MIB::tray1_fuser_temperature
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.13.1 snmpget -v2c -c public <target> LaserJet-Series2100-MIB::tray1_fuser_temperature.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.13.1 i <value>
Start monitoring Hewlett-Packard LaserJet 2100-series printer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LaserJet-Series2100-MIB::tray1_fuser_temperature OID value, configure state conditions and alerts, and monitor any Hewlett-Packard LaserJet 2100-series printer from a single console.
OID Breakdown
Upper-level ancestors (18 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9 | net_peripheral | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4 | netdm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2 | dm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1 | device | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4 | destination_subsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1 | print_engine | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3 | intray | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3 | intrays | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1 | intray1 | CLJ8500-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.13 | tray1_fuser_temperature | LaserJet-Series2100-MIB |