All MIBs › LUMINOUS-SHELF-MIB › lumCardAdminState
lumCardAdminState
Module: LUMINOUS-SHELF-MIB
OID (symbolic): LUMINOUS-SHELF-MIB::lumCardAdminState
OID (numeric): 1.3.6.1.4.1.4614.1.1.2.1.1.10
Node type: OBJECT-TYPE
Type: LumCardAdminState
Access: read-write
Description: This object indicates the state transition
desired by the management.
Below are the valid values that SNMP Manager
can set, depending on lumCardType:
lumCardType lumCardAdminState SET request
=========== =============================
syscon(2) switchover(7)
ring(3) switchover(7)
t1(4) active(1), standby(2),
outOfService(4), reset(6),
switchover(7)
ether(5) active(1), standby(2),
outOfService(4), reset(6)
Other values set by SNMP Manager for the
cards above, or any value set for other cards
will be rejected by SNMP Agent.What is lumCardAdminState?
Sets the administrative state transition requested for this card, with the valid values depending on lumCardType: syscon and ring cards accept only switchover(7); t1 cards accept active(1), standby(2), outOfService(4), reset(6), or switchover(7); ether cards accept active(1), standby(2), outOfService(4), or reset(6). Any other value, or any value set for a card type not listed, is rejected by the agent.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4614.1.1.2.1.1.10 snmpwalk -v2c -c public <target> LUMINOUS-SHELF-MIB::lumCardAdminState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4614.1.1.2.1.1.10.1 snmpget -v2c -c public <target> LUMINOUS-SHELF-MIB::lumCardAdminState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4614.1.1.2.1.1.10.1 s <value>
Start monitoring Luminous Networks metro Ethernet/PON access equipment (shelf inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LUMINOUS-SHELF-MIB::lumCardAdminState OID value, configure state conditions and alerts, and monitor any Luminous Networks metro Ethernet/PON access equipment (shelf inventory) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4614 | luminous | LUMINOUS-PROVISIONING-MIB |
| 1.3.6.1.4.1.4614.1 | lumADM | LUMINOUS-PROVISIONING-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4614.1.1 | lumADMShelfMIB | LUMINOUS-SHELF-MIB |
| 1.3.6.1.4.1.4614.1.1.2 | lumADMCard | LUMINOUS-SHELF-MIB |
| 1.3.6.1.4.1.4614.1.1.2.1 | lumADMCardTable | LUMINOUS-SHELF-MIB |
| 1.3.6.1.4.1.4614.1.1.2.1.1 | lumADMCardEntry | LUMINOUS-SHELF-MIB |
| 1.3.6.1.4.1.4614.1.1.2.1.1.10 | lumCardAdminState | LUMINOUS-SHELF-MIB |