LUCENT-GENERIC-DLOAD-MIB :: luUploadFailureCode

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › LUCENT-GENERIC-DLOAD-MIB › luUploadFailureCode

luUploadFailureCode

Module: LUCENT-GENERIC-DLOAD-MIB

OID (symbolic): LUCENT-GENERIC-DLOAD-MIB::luUploadFailureCode

OID (numeric): 1.3.6.1.4.1.677.5.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: While an upload is in progress this will always be 'no-error'. After an upload is complete this indicates the success or failure of the upload. If it is anything other than 'no-error' then 'luUploadStatusText' will contain a textual description of the error. Error codes from 100 upwards are errors returned from a TFTP server. Errors below this are locally generated.

Configuration files may return errors after / before upload, as a result of reading a config file into the system.

conf-file-gen-err - General (unknown error) conf-file-exec-error - Generation of config file resulted in execution errors.

What is luUploadFailureCode?

Reports the outcome of the last upload: no-error(1) while one is in progress or after a clean finish, or a specific failure like timeout(4), flash-write-error(9), or a TFTP-server error code from 100 upward such as access-violation(102), with details available in luUploadStatusText.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.677.5.1.7
snmpwalk -v2c -c public <target> LUCENT-GENERIC-DLOAD-MIB::luUploadFailureCode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.677.5.1.7.1
snmpget -v2c -c public <target> LUCENT-GENERIC-DLOAD-MIB::luUploadFailureCode.1

Start monitoring Lucent Technologies telecommunications platform (firmware download/upload) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LUCENT-GENERIC-DLOAD-MIB::luUploadFailureCode OID value, configure state conditions and alerts, and monitor any Lucent Technologies telecommunications platform (firmware download/upload) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.677luDloadLUCENT-GENERIC-DLOAD-MIB
1.3.6.1.4.1.677.5luUploadTableLUCENT-GENERIC-DLOAD-MIB
1.3.6.1.4.1.677.5.1luUploadEntryLUCENT-GENERIC-DLOAD-MIB
1.3.6.1.4.1.677.5.1.7luUploadFailureCodeLUCENT-GENERIC-DLOAD-MIB